8/22/22

scripts/build-3.sh

@@ -157,7 +157,7 @@ printf "[ i ] Creating system directories...\n"
 	cat > ${EVEREST}/targetfs/etc/passwd << "EOF"
 	root::0:0:root:/root:/bin/ash
 EOF
-	cat > ${CLFS}/targetfs/etc/group << "EOF"
+	cat > ${EVEREST}/targetfs/etc/group << "EOF"
 	root:x:0:
 	bin:x:1:
 	sys:x:2:
@@ -251,8 +251,44 @@ printf "[ i ] Building the Linux kernel...\n"
 printf "[ i ] Finished build of the Linux kernel...\n"
 
 printf "[ i ] NOTE: Bootloader will need to be installed manually by the user (unless utilizing the bootloader of another system)\n"
+printf "[ i ] GRUB can be installed through Glacier.\n"
 	wait 3
 
 printf "[ i ] Bootstrapping Glacier package management system...\n"
-	
+	cd ${EVEREST}/tmp
+	git clone https://git.everestlinux.org/EverestLinux/glacier
+	cd install
+	tar xvf glacier.tar.gz
+	cd src
+	chmod +x INSTALL.sh
+	./INSTALL.sh
+	cd ${EVEREST}/sources
 
+printf "[ i ] Setting up bootscripts...\n"
+	tar -xvf master.tar.gz
+	cd bootscripts-embedded-master
+	make DESTDIR=${EVEREST}/targetfs install-bootscripts
+	
+printf "[ i ] Creating system files...\n"
+printf "[ i ] It may be a good idea to review the following files after this script finishes:\n"
+printf "	/etc/mdev.conf\n"
+printf "	/etc/profile\n"
+printf "	/etc/inittab\n"
+printf "	/etc/hostname\n"
+printf "	/etc/hosts\n"
+
+	cd /home/everest/everest-install/scripts/sysfiles
+	cp mdev ${EVEREST}/targetfs/etc/mdev.conf
+	cp profile ${EVEREST}/targetfs/etc/profile
+	cp inittab ${EVEREST}/targetfs/etc/inittab
+	cp hostname ${EVEREST}/targetfs/etc/hostname
+	cp hosts ${EVEREST}/targetfs/etc/hosts
+	mkdir -pv ${EVEREST}/targetfs/etc/network/if-{post-{up,down},pre-{up,down},up,down}.d
+	mkdir -pv ${EVEREST}/targetfs/usr/share/udhcpc
+
+	cat > ${EVEREST}/targetfs/etc/network/interfaces << "EOF"
+	auto eth0
+	iface eth0 inet dhcp
+EOF
+	cp default.script ${EVEREST}/targetfs/usr/share/udhcpc/default.script
+	chmod +x ${EVEREST}/targetfs/usr/share/udhcpc/default.script

scripts/sysfiles/default.script

@@ -0,0 +1,38 @@
+#!/bin/sh
+# udhcpc Interface Configuration
+# Based on http://lists.debian.org/debian-boot/2002/11/msg00500.html
+# udhcpc script edited by Tim Riker <Tim@Rikers.org>
+
+[ -z "$1" ] && echo "Error: should be called from udhcpc" && exit 1
+
+RESOLV_CONF="/etc/resolv.conf"
+[ -n "$broadcast" ] && BROADCAST="broadcast $broadcast"
+[ -n "$subnet" ] && NETMASK="netmask $subnet"
+
+case "$1" in
+        deconfig)
+                /sbin/ifconfig $interface 0.0.0.0
+                ;;
+
+        renew|bound)
+                /sbin/ifconfig $interface $ip $BROADCAST $NETMASK
+
+                if [ -n "$router" ] ; then
+                        while route del default gw 0.0.0.0 dev $interface ; do
+                                true
+                        done
+
+                        for i in $router ; do
+                                route add default gw $i dev $interface
+                        done
+                fi
+
+                echo -n > $RESOLV_CONF
+                [ -n "$domain" ] && echo search $domain >> $RESOLV_CONF
+                for i in $dns ; do
+                        echo nameserver $i >> $RESOLV_CONF
+                done
+                ;;
+esac
+
+exit 0

scripts/sysfiles/hosts

@@ -1,6 +1,6 @@
 # Begin /etc/hosts (network card version)
 
 127.0.0.1 localhost
-192.168.1.1 [<HOSTNAME>.example.org] everest
+192.168.1.1 everest.everestlinux.org everest
 
 # End /etc/hosts (network card version)